This post contains affiliate links. We may earn a small commission when you buy through our links — at no extra cost to you.
There’s a familiar disappointment: your overnight guest wakes up sinking into a half-deflated air mattress. Despite bold claims of leak‑proof design, many raised air beds slowly lose pressure — even top‑rated models often need a top‑off before the second night. It’s the category’s open secret.
But the right air mattress can deliver a genuinely comfortable guest stay, especially if you choose based on how it’s built rather than marketing promises. This guide zeroes in on the queen‑size models with the most consistent air retention, sturdy coil designs, and reliable built‑in pumps — the features that actually keep a bed flat through the night.
Whether you host occasional visitors or set up a semi‑permanent spare bed, the picks below match specific hosting styles and budgets without overhyping miracle materials.
Best for Frequent Guests
SoundAsleep Dream Queen
Key Features
- Built-in Pump & Speed: Yes, under 4 min
- Height: 19 in
- Weight Capacity: 500 lbs
- Coil Type: ComfortCoil 40-air coil
- Top Surface: Flocked top, SureGrip bottom
- Price: Mid-Range
The ComfortCoil 40-air coil system and 19-inch raised height give this mattress a feel that comes close to a traditional bed — most guests won’t notice they’re on an airbed. The built-in pump inflates the queen size in under four minutes with a single button, and the SureGrip bottom keeps it in place on any floor. Construction quality is consistent, with a 1-year warranty and responsive customer service backing each unit.
Like every air mattress, the SoundAsleep will lose some pressure over time. The degree varies between individual units — some hold firm for a full weekend, others may need a quick top-off after a couple of days. Pinhole leaks and seam separation have been noted in a portion of units, though these are not universal experiences. The tradeoff is manageable for most guest bed scenarios: a few seconds of pump time before arrival keeps the surface firm.
This mattress fits best as a primary guest bed for homes where visitors stay several times a year. Comfort and easy setup take priority, and the brand’s track record with customer support adds peace of mind. It is not the right choice for heavy couples — the 500-pound weight limit is a hard boundary — or for anyone expecting a leak-free experience for nightly use over multiple years. If you need active pressure maintenance to guarantee a zero-top-off night, consider the CloudNine model with its auto-replenishing pump.
Independent reviewers have consistently ranked this model first for nearly a decade, a track record no other air mattress in this set matches. The mid-range price reflects that reliability — it’s not the cheapest option, but the combination of comfort, support, and accessible customer service makes it a sound investment for anyone who hosts guests multiple times a year.
Pros
- Surface feel rivals a traditional mattress, reducing pressure points for side and back sleepers.
- Inflates in under 4 minutes with a single-button pump — no separate pump or manual effort.
- Build quality and customer support are consistently rated above average, with a 1-year warranty.
- Cost per night of use is low given the comfort level and durability for periodic guest stays.
Cons
- Air retention consistency varies between units; some require topping off after a couple of days.
- Slow leaks from pinholes or seams can develop over time in some units.
For homes with regular guests who want a comfortable, easy-to-set-up airbed, this is the most thoroughly field-tested option available.
Best for Instant Setup
King Koil Pillow Top Queen
Key Features
- Built-in Pump & Speed: Yes, 120 sec
- Height: 20 in
- Weight Capacity: 600 lbs
- Coil Type: Patented coil beam
- Top Surface: Fully flocked, built‑in pillow
- Price: Mid-Range
The King Koil Pillow Top Queen inflates in just 120 seconds and stands 20 inches high with a fully flocked, built-in pillow. That immediate plushness feels more like a premium foam topper than a standard air bed, and the coil beam construction supports up to 600 pounds without sagging. The integrated pump makes setup and takedown a one-person job, and the flocked surface keeps sheets from sliding around during the night.
For hosting guests a few nights at a time, the King Koil delivers a memorable “real bed” experience that earns genuine compliments. The tradeoff is air retention: the mattress can lose pressure overnight or after repeated use, and seam leaks may develop under the stress of frequent guests. If your guest room sees heavy rotation or week‑long stays, the top pick’s more consistent pressure maintenance makes it a safer bet. But for occasional visits where speed and a plush first impression outweigh overnight reliability concerns, this bed strikes an appealing balance.
The mid‑range price lands between budget throwaways and premium self‑maintaining designs, and for that you get a genuinely comfortable surface that’s easy to set up and break down. Plan to top off the air after the first inflation — pre‑stretching the material helps the bed reach its final firmness — and keep a patch kit on hand for unforeseen seam issues. That’s a small inconvenience next to the convenience of instant guest readiness and a surface that looks and feels decidedly un‑inflatable.
Pros
- Built‑in pillow and plush flocked top rival traditional mattress comfort.
- High‑end feel and sturdy coil beam construction hold up to 600 lbs without sagging.
- Inflation in under 2 minutes with the integrated pump — no separate accessories needed.
- Mid‑range price delivers luxury touches that rival pricier models.
Cons
- Air may deflate noticeably overnight, requiring re‑inflation for multi‑night stays.
- Seam leaks can develop over time, especially with frequent or heavy use.
If your guest stays are short and you want to wow visitors with a plush, tall bed that sets up in two minutes, the King Koil is a compelling pick — just don’t expect it to hold firm night after night without a top‑up.
Best for Heavy Couples
Dr. air Queen 18 inch
Key Features
- Built-in Pump & Speed: Yes, 3 min
- Height: 18 in
- Weight Capacity: 800 lbs
- Coil Type: Honeycomb pillar
- Top Surface: Velvety flocked top
- Price: Mid-Range
The Dr. air Queen stands apart with an 800 lb weight limit — a full 200 lb more than typical models — and a honeycomb internal structure that resists sagging under concentrated weight. Unlike a competing high‑capacity option that leans on a repair kit as a central feature, this bed channels its focus into stability and a velvety flocked top that stays quiet when you shift.
Inflation wraps up in about three minutes, and the 18‑inch raised height makes getting in and out feel like a regular bed. The top surface mimics a plush mattress topper: air pressure distributes evenly through the honeycomb network, preventing the balloon‑like bounce some airbeds produce. Guests routinely remark that it rivals memory foam in comfort. Deflation is equally swift, letting you pack it away before coffee finishes brewing.
Despite the advertised 48‑hour leak‑proof test, a slow seam or valve leak can appear after the first few uses. This is not a set‑and‑forget bed — a patch kit becomes a prudent accessory. For couples and heavy individuals who want a tall, supportive guest setup and don’t mind occasional touch‑ups, the tradeoff is worth the capacity. Shoppers seeking a completely maintenance‑free experience will find the top pick a better match.
Pros
- Exceptionally comfortable flocked top rivals memory foam feel without the PVC crinkle.
- Honeycomb pillars and 800 lb limit support two adults plus a child or heavy mixed weight without dip.
- Built‑in pump inflates the 18‑inch mattress in about 3 minutes; deflation is just as fast.
- Mid‑range price delivers a premium top and the highest weight rating in its class.
Cons
- Slow air leaks at the seams or valve can surface after initial uses, requiring patching despite the leak‑proof claim.
The Dr. air Queen gives heavy couples a tall, hotel‑like bed at a mid‑range price — provided you’re okay with occasional seam repairs.
Best for Mattress Feel
Tencity Foam Topper Queen
Key Features
- Built-in Pump & Speed: Yes, 3 min
- Height: 20 in
- Weight Capacity: 660 lbs
- Coil Type: U‑shaped PVC strap
- Top Surface: Quilted 3cm foam topper
- Price: Premium
A 3cm quilted foam topper eliminates the plastic feel and crinkle noise typical of airbeds, making this feel closer to a traditional mattress than any other inflatable option. The U‑shaped PVC strap support adds rigidity, and the anti‑slip bottom keeps the bed in place on smooth floors.
Inflation takes about three minutes via the built‑in pump, and the mattress holds its firmness overnight with minimal pressure loss – no middle‑of‑the‑night topping off needed. The 20‑inch height and 660‑pound capacity provide easy entry and stable support for two adults.
This is a strong fit for guest rooms where a premium sleep experience justifies the higher upfront cost. Because the product has limited field history, it suits occasional overnight stays rather than nightly rotation – buyers wanting a long‑term daily bed should consider a traditional mattress or a more extensively tested air mattress.
Pros
- Quilted foam topper gives a real-mattress feel without the plastic sensation or noise
- Holds firm pressure all night – no need to re-inflate during use
- Quick three-minute inflation with the built-in pump and simple deflation for storage
Cons
If you want an airbed that feels like a real mattress for occasional guests, the Tencity delivers a noticeably better sleep surface than typical inflatables – just keep its shorter track record in mind for long-term use.
Best for Anti-Roll
VOSSER Queen Air Mattress
Key Features
- Built-in Pump & Speed: Yes, 3 min
- Height: 18 in
- Weight Capacity: 660 lbs
- Coil Type: Patented I‑Beam
- Top Surface: Flocked, non‑slip base
- Price: Budget/Mid
VOSSER’s I‑Beam construction sets this queen mattress apart from the coil‑style models in the budget range. The raised beams create a level sleeping surface that resists the dip that usually pulls couples together, while the built‑in pump inflates it in about 3 minutes — quiet enough not to disrupt a sleeping household. It’s a value‑focused bed that prioritizes partner comfort, backed by an unusually long 10‑year support window.
The sleeping surface remains consistently flat across the mattress — a notable advantage for side sleepers and anyone sensitive to uneven pressure. Setup and breakdown are straightforward: the controls are intuitive, and the pump handles both inflation and deflation without struggling. The 18‑inch height makes getting in and out feel more like a traditional bed.
This mattress suits couples who need a guest bed that won’t roll them into a heap overnight, and buyers looking for a budget option with a decade of support. Air retention can be inconsistent over time — some units may develop slow seam leaks that require topping off after a night or two. That makes it the right pick for occasional guest stays or camping use, where the easy setup and anti‑roll design outweigh the need to occasionally refill. Anyone expecting a permanently inflated bed should invest in a self‑maintaining pump model instead.
Pros
- I‑Beam design gives a flat, stable surface that keeps two sleepers from rolling together
- Durable materials and fast, quiet inflation; the flattest sleeping surface among many tested
- Intuitive setup and breakdown with straightforward controls
Cons
- Air retention may degrade over time; some units need occasional re‑inflation
If you need a queen air mattress that keeps two sleepers from colliding, the VOSSER’s I‑Beam design delivers a flatter night than most budget beds, and the 10‑year support provides peace of mind. Just plan to top it off occasionally — a small tradeoff for the price.
Best for All-Night Firm
SoundAsleep CloudNine Queen
Key Features
- Built-in Pump & Speed: Dual smart pump, 4 min
- Height: 19 in
- Weight Capacity: 500 lbs
- Coil Type: I‑Beam coils
- Top Surface: Waterproof flocked top
- Price: Luxury
The CloudNine’s dual smart pump technology addresses the central frustration of air mattresses: overnight pressure loss. Where most beds require manual top-offs or wake you with sagging, a secondary whisper-quiet pump re-introduces air in microbursts whenever firmness dips. The primary pump inflates the Queen in about four minutes; after that, the bed holds its chosen comfort level — plush, medium, or firm — without the sleeper noticing the system working.
The 19-inch height and I-Beam coil structure provide a supportive, non-bouncy sleep surface that feels closer to a traditional mattress than a typical airbed. Adjustable firmness is a concrete benefit: once set, the auto-maintain logic locks it in, and the waterproof flocked top resists sliding. The result is a consistent, flat surface through the night, which matters most for multi-night guests or as a semi-permanent bed in a home office.
This mattress fits households that rely on an airbed as a dependable guest solution and are willing to spend for a maintenance-free experience. The premium price and occasional reports of pump or seam issues after extended use mean it’s less suited for infrequent stays or tight budgets. The CloudNine prioritizes uninterrupted comfort over minimal cost — a tradeoff that pays off when a flat mattress simply isn’t an option.
Pros
- Adjustable firmness with three settings that hold true through the night
- Secondary pump quietly maintains pressure so sleep is never disrupted
- Air retention eliminates the gradual sag that plagues typical airbeds
- 19-inch raised height and I-Beam coils create a sturdy, bed-like feel
Cons
- Premium-priced, placing it beyond the reach of casual or one-night use
- Pump or seam durability can be a concern after sustained daily use
For households that treat an air mattress as a semi-permanent fixture, the CloudNine’s self-monitoring system delivers a genuine full-night’s sleep without the usual mid-slump adjustments.
Best for Infrequent Guests
iDOO Queen Air Mattress
Key Features
- Built-in Pump & Speed: Yes, 3 min
- Height: 18 in
- Weight Capacity: 650 lbs
- Coil Type: 40‑air coil continuous
- Top Surface: Flocked top
- Price: Budget
The iDOO’s 40-coil continuous coil design provides a firm, supportive sleep surface, and the built-in pump inflates the mattress in about three minutes. Air retention can be inconsistent; some units lose firmness overnight, and occasional seam leaks have been reported. For short guest stays where a quick top-off isn’t a bother, it delivers solid value with an 18-inch raised height and a 650-pound weight capacity. It’s best seen as a temporary solution — not a nightly sleeper.
Pros
- Firm surface prevents sagging and bottoming out for a budget-friendly price
- Built-in pump inflates in about three minutes and packs down quickly
- Good value as a spare bed for occasional guests
Cons
- Seam leaks may develop in some units after limited use
A solid spare bed for infrequent overnight visitors or temporary use when you can top off air as needed; not a set-it-and-forget-it solution.
Best for 2-Year Warranty
OhGeni Queen Air Mattress
Key Features
- Built-in Pump & Speed: Yes, 3 min
- Height: 18 in
- Weight Capacity: 650 lbs
- Top Surface: Flocked, quiet base
- Price: Budget
A flocked top provides a slip-free, comfortable surface that keeps two sleepers from rolling together — a standout feature at this price. Setup is straightforward: plug in, inflate in minutes, and the cord tucks away neatly. The thick PVC build feels durable and packs down compactly. Pump reliability and air retention can be inconsistent; some units may lose pressure overnight or develop pump issues after limited use. The 2‑year manufacturer support acts as a safety net, making it a reasonable choice for occasional guest beds where a warranty claim process is acceptable.
Pros
- Flocked top prevents slipping and stops couples from rolling together
- Setup is fast — inflates in minutes with tidy cord storage
- Durable PVC build that packs away easily
Cons
- Air retention can be inconsistent; may need topping off between uses
- Built-in pump can require a replacement under warranty
For families needing a quick-setup spare bed for occasional guests, this mattress provides comfortable sleep and a 2-year warranty to manage potential pump hiccups.
Best for Compact Storage
Sebor Queen Air Mattress
Key Features
- Built-in Pump & Speed: Yes, under 3 min
- Height: 18 in
- Weight Capacity: 370 lbs (reported)
- Coil Type: Patented internal
- Top Surface: Velvet‑like top
- Price: Budget/Mid
Patented internal construction provides a plush, quiet surface that feels more like a traditional mattress than typical PVC. The built-in pump brings the 18-inch queen to full height in under three minutes, and the whole thing packs down into a zippered carry bag with handles — a genuine advantage for small closets or car trunks. Long-term air retention and seam durability haven’t been subjected to the same level of real-world repetition as more established models, so it’s not the pick for a nightly-use guest room. It shines for campers, travelers, or households that need a spare bed a few times a year and want quick setup, a premium feel, and zero storage hassle.
Pros
- Plush, quiet surface mimics a real mattress feel, eliminating the crinkle of typical PVC.
- Supports up to 370 lbs without sagging, holding firm for heavier individuals.
- Packs down into an included carry bag with handles for effortless transport and storage.
Cons
- Air retention during multi-night stays can drop, requiring a quick top-off before sleep.
- Maximum weight capacity isn’t officially stated, so shoppers above average weight must rely on user-reported figures.
For guest beds that live in the closet most of the year or weekend camping trips where packability is key, this mattress delivers a comfortable night’s sleep without the bulk.
Best for 800 Lb Support
CHERIMOR Queen Air Mattress
Key Features
- Built-in Pump & Speed: Yes, 3 min
- Height: 18 in
- Weight Capacity: 800 lbs
- Coil Type: Honeycomb pillar
- Top Surface: Flocked top
- Price: Mid-Range
The honeycomb pillar architecture and flocked top give this 18‑inch queen a firm, structured sleep surface that resists sagging under heavy loads. A built‑in pump reaches full height in roughly three minutes, and the reinforced dual‑stitched frame suggests a build‑for‑strength philosophy. The factory backs its durability claim with a 48‑hour leak test and includes a heavy‑duty patch kit — a nod to self‑sufficiency. Seam defects that cause gradual air loss are a possibility, out of the box or after a few uses. For anyone willing to troubleshoot or patch an occasional leak, the 800‑pound capacity and stable honeycomb grid remain genuine assets, especially for couples and overnight guests.
Pros
- Flocked surface and honeycomb columns create a firm, sag‑resistant feel that supports even weight distribution.
- Quick 3‑minute inflation via straightforward built‑in pump controls.
- 800‑pound capacity handles couples or heavy sleepers without sinking or roll‑off.
Cons
- Seam defects and air leaks may require mid‑stay reinflation or patching with the included repair kit.
If an 800‑pound capacity and firm, honeycomb support are priorities and you’re prepared to address potential air leaks with the supplied patch kit, the CHERIMOR is a capable guest bed for occasional use.
Best for Auto-Maintain
Serta Never Flat Queen
Key Features
- Built-in Pump & Speed: Dual pump, —
- Height: 18 in
- Weight Capacity: 500 lbs
- Coil Type: 35‑coil construction
- Top Surface: Flocked top
- Price: Mid-Range
The Never Flat dual-pump system monitors and tops off air pressure all night, keeping the mattress fully supportive. Paired with 35 coils and an 18-inch height, it feels like a real bed rather than an inflatable. Inflation is quick, and the comfort is strong for an air mattress.
The catch: seam durability and pump reliability can be inconsistent. Seams may split or leak over time, and the silent pump sometimes stops auto-replenishing, causing overnight deflation. For periodic guest use where uninterrupted sleep matters more than longevity, and where you’re ready to use the two-year warranty, it’s a sound fit — just not a workhorse.
Pros
- Overnight pressure maintenance keeps the bed fully supportive without manual topping-off.
- Fast inflation and 18-inch bed height approximate a real mattress experience.
Cons
- Seams can split or leak with limited use, threatening air retention.
- The secondary never-flat pump can malfunction, leading to unnoticed deflation overnight.
An air mattress for occasional guests when staying fully inflated overnight is a priority and you’re prepared to handle warranty claims for seam or pump issues — not the choice for those needing a durable long-term bed.
Best for Kids’ Sleepovers
Intex Twin Air Mattress
Key Features
- Built-in Pump & Speed: Yes, 1.5 min
- Height: 10 in
- Weight Capacity: 300 lbs
- Coil Type: Fiber‑Tech beam
- Top Surface: Velvety top, built‑in pillow
- Price: Budget
The Intex Dura-Beam Twin inflates in about 1.5 minutes using the built-in pump, and the velvety pillow top with integrated pillow adds a layer of comfort that kids especially appreciate.
However, overnight air retention is a significant variable — the bed can soften or go flat by morning, which makes it a poor fit for adults or anyone needing a full night’s rest. That trade-off keeps it firmly in the sleepover and camping-with-power niche, where occasional deflation is no big deal.
Pros
- Comfortable for a twin airbed, and the built-in pillow is a nice touch for kids or solo campers.
- Very easy to inflate and deflate — perfect for quick sleepovers or camping with AC access.
Cons
- Air retention may not last overnight; the bed can lose firmness and go flat, especially under adult weight.
It’s a low-cost solution for children’s sleepovers or camping with AC access, but don’t count on it for adult guests or multi-night use.
Best for Camp-Ready Spare
Intex Twin Basic Air Mattress
Key Features
- Built-in Pump & Speed: No pump (valve only)
- Height: 10 in
- Weight Capacity: 300 lbs
- Coil Type: Fiber‑Tech
- Top Surface: Velvety top
- Price: Budget
The Intex standard air mattress delivers surprisingly decent comfort for its ultra-low price, making it a fine disposable pad for kids’ sleepovers or car camping. The catch: it doesn’t include a pump, so you’ll need to supply your own — and air retention varies; some units stay firm overnight, others gradually soften. Without a built-in pump and with spotty air holding, it’s a step behind the instant-setup twin with a pump. Best reserved for occasional child use where a flat bed isn’t a crisis.
Pros
- Surprisingly comfortable for a bare‑bones twin; great for kids’ sleepovers and camping
- Budget-friendly enough to keep as a spare for light-duty, occasional use
Cons
- No pump included; you’ll need an external electric pump (or strong lungs) to inflate it
- Air tightness varies — one unit may hold air for days, another starts to soften within hours
If you already own an electric pump and need a spare twin mattress for occasional child sleepovers or car camping where a slow leak won’t ruin the night, this is the lowest-cost way to get one.
How to Choose
All air mattresses lose some air, but the difference between a great guest bed and a disappointing one comes down to how the mattress manages that loss.
Built‑in Pump and Inflation Speed
A built‑in electric pump is non‑negotiable for home guest use — it eliminates the hassle of hunting for a separate blower and ensures your guests can set up the bed themselves. Most pumps inflate a queen mattress in 2‑4 minutes, but deflation speed matters too: a two‑way pump that actively sucks out air makes packing away far less of a wrestling match.
The hidden trade‑off is that an integrated pump adds weight and becomes a single failure point. If the pump breaks, the whole mattress is useless. For this reason, models with a separate pump connection (and the option to use an external blower) can be more durable over the long haul, even if they’re less convenient.
Height and Double‑High Design
An 18‑22 inch raised mattress feels more like a real bed, making it easier for older guests or anyone with mobility issues to get in and out. Taller designs also have more internal air chamber volume, which can help smooth out minor pressure changes — you’re less likely to feel the floor after a few hours.
The downside is weight and bulk. A 22‑inch queen can tip the scales at 20+ pounds and takes up substantial closet space. If you’re only pulling it out a few times a year, that trade‑off is worthwhile; if storage is tight, a lower profile makes more sense.
Weight Capacity and Coil Design
A higher weight limit (over 600 lbs) signals a sturdier internal structure, which prevents the mattress from sagging under two sleepers. The coil pattern matters: honeycomb or I‑Beam columns spread weight more evenly than simple ridges, reducing the ‘rolling together’ effect and minimizing pressure points.
The physics here is that a denser coil arrangement distributes body weight across more pillars, so the material stretches less in any one spot. Couples who weigh close to the limit will want a honeycomb or I‑Beam design; solo sleepers under 250 lbs can get away with basic beam construction.
Air Retention and Why ‘Leak‑Proof’ Doesn’t Mean Zero Air Loss
PVC expands when you first inflate it, and ambient temperature changes cause air molecules to contract at night — both make a mattress feel softer after a few hours even if there’s no hole. The most reliable way to cope is to top off the bed before bedtime each night and expect a break‑in period of 2‑3 uses before the material stabilizes.
If overnight deflation is a dealbreaker, only a dual‑pump mattress with active silent maintenance can continuously refill micro‑losses. Without that system, even a perfectly sealed seam will lose a small amount of firmness as the material relaxes.
Surface Material and Firmness Feel
A flocked velvety top adds softness and keeps fitted sheets from sliding, but it also increases surface friction — which can make the mattress noisier when someone shifts position. Thicker flocking tends to feel plusher but can be harder to clean.
A quilted foam topper (like Tencity’s) physically separates the sleeper from the PVC bladder, drastically reducing that synthetic squeak and creating a temperature buffer. The trade‑off is that foam adds bulk and can slow deflation and packing, so it’s best suited for permanent guest‑room setups rather than frequent shuttling.
FAQ
Why does my air mattress keep deflating overnight even though I can’t find a hole?
PVC stretches significantly during the first few uses, and cooler nighttime air temperatures cause the air inside to contract. Even a perfectly sealed mattress can lose firmness because of these two effects. After 2‑3 nights of use and re‑inflation, the material typically stabilizes, but you should plan to top off the air before each evening for the life of the bed.
How long can you expect a raised air mattress to last with regular guest use?
With typical use of a couple nights per month, most mid‑range queen air mattresses last 1‑3 years before seam integrity or pump wear becomes problematic. The primary failure points are slow seam leaks and pump motor burnout; a mattress that gets used weekly for months will often fail within a year. Models from brands with dedicated US‑based support and a warranty of at least a year offer the most protection against early failure.
Is a dual‑pump air mattress worth the extra money for home use?
If your guest has back issues or you use the mattress as a semi‑permanent bed, the silent secondary pump that maintains pressure all night is genuinely worth it. It eliminates the most common air‑bed complaint — waking up in a bowl‑shaped dip — without any effort on your part. For infrequent guest use where a quick top‑off before bed is acceptable, a single‑pump model saves significant money.
Do I need a mattress topper for a flocked‑top air mattress?
Not necessarily, but a thin memory foam topper further reduces the PVC texture and muffles noise, which light sleepers will appreciate. Flocked tops are soft enough for most guests, yet they don’t stop the slight crinkle sound when rolling over. Adding a topper also creates an extra thermal layer, making the bed warmer in cool rooms.












